7.0 Inch 800*480 HD Camera Video Screen DT322X220034Z240201G/H/I

Features:

● Based on T5L2, running DGUS II system.

● 7.0-inch, 800*480 pixels resolution, 16.7M colors, TN TFT display.

● Supports single-channel 1080P HD display or dual-channel 720P simultaneous display.

● Capacitive touch/Resistive touch/No touch are available.

● Supports camera zooming, screenshot saving, and video recording functions.


Specification

Product Tags

Specification

国际站PCB模板
8pin配件1
Model
DT322X220034Z240201G No touch
DT322X220034Z240201H Capacitive touch
DT322X220034Z240201I Resistive touch
Hardware and interface description
LCM interface FPC50_0.5mm, RGB interface
TP interface Capacitive touch: COB structure, IIC interface
Resistive touch: 4Pin_1.0mm interface
User interface 8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash 16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Buzzer 3V passive buzzer. Power: <1W
RTC Super-capacitor for power supply. Accuracy: ±20ppm@25℃. It can work normally for 7 days after power failure
SD card interface 1 FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
SD card interface 2 Support saving camera image data
Debug interface 4Pin_ 2.54mm interface, not open for use
USB interface Horizontal USB interface, Used for firmware burning
Micro USB interface Used for R11 firmware burning
Camera interface 2pin_ 2.54mm vertical interface(supports connecting single 1080P or two 720P cameras, and when connecting two channels, the camera smust be of the same type. Total transmission frame rate: 24 frames per second)
PGT05 interface When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal
Display Parameters
LCD Type TN, TFT LCD
Viewing Angle Normal viewing angle, 70°/70°/50°/70°(L/R/U/D)
Resolution 800×480 pixels (support 0°/90°/180°/270°)
Color 24-bit 8R8G8B
Active Area (A.A.) 154.08mm (W) ×85.92mm (H)
Backlight Mode LED
Backlight Service Life >20000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
Brightness DT322X220034Z240201G: 300nit
DT322X220034Z240201H: 250nit
DT322X220034Z240201I: 250nit
Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.
Touch Parameters
Type CTP (Capacitive touch panel)
Structure G+G structure with surface cover of tempered glass
Touch Mode Support point touch and drag
Surface Hardness 6H
Light Transmittance Over 85%
Life >20000 hours
  
Type RTP (Resistive touch panel)
Structure ITO film + ITO glass
Touch Mode Support point touch and drag
Surface Hardness 3H
Light Transmittance 78%±3%
Life Over 1,000,000 times touch
Serial Interface Parameters
Mode UART2: ON=TTL/CMOS; OFF=RS232(Defaulted RS232)
UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration)
Voltage Level Test Condition Min Typ Max Unit
Output 1, Iout = -4mA 4.78 5.0 - V
Output 0, Iout = 4mA - - 0.4 V
Input 1 2.5 5.0 - V
Input 0 - - 1.0 V
Baud Rate 3150~3225600bps, typical value of 115200bps
Data Format UART2: N81
UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable 8Pin_2.0mm
Electrical specifications
Rated Power <5W
Operating Voltage 6~36V, typical value of 12V
Operating Current 410mA VCC=12V, max backlight
160mA VCC=12V, backlight off
Recommended power supply: 12V 1A DC
Operating environment
Operating Temperature -20℃~70℃ (12V @ 60% RH)
Storage Temperature -30℃~80℃
Conformal Coating Yes
Operating Humidity 10%~90%RH, typical value of 60% RH
Application

1

12 (1)


  • Previous:
  • Next:

  • Related Products