5 Inch INCELL Smart LCD HMI Touch Panel
DMG12720T050_06WTC (Industrial Grade)

T5L UART LCD module-5.0Inch

Features:

●  T5L2 chip, DGUS II System;

●  Industrial Grade, IPS-TFT-LCD, Wide View Angle;

●  5.0 Inch, 720*1280 Pixels resolution, 16.7M colors; 24 bit, 8R8G8B;

●  Incell Capacitive Touch Screen;

●  Backlight Service Life: >10000 Hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness )

●  Brightness Control: : 250nit, 0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range)

●  Use DWIN DGUS II V7.6GUIs software development

 


Specification

Description

Product Tags

Video

Specification

DMG12720T050_06WTC
ASP
Hardware and interface description
T5L2 ASIC Developed by DWIN. Mass production in 2019,1MBytes Nor Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times
Incell LCM interface FPC40_0.5mm, MIPI interface
User interface FCC50_0.5 mm 
Flash 16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
SD card interface FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
Display Parameters
LCD Type IPS, TFT LCD
Viewing Angle Wide viewing angle, 85°/85°/85°/85°(L/R/U/D)
Resolution 720×1280 pixels (support 0°/90°/180°/270°)
Color 24-bit 8R8G8B
Active Area (A.A.) 110.4mm (W)×62.1mm (H)
Backlight Mode LED
Backlight Service Life >10000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
Brightness DMG12720T050_06WTC: 250nit
Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.
Touch Parameters
Type CTP (Capacitive touch panel)
Structure INCELL structure
Touch Mode Support point touch and drag
Surface Hardness -
Light Transmittance Over 95%
Life Over 1,000,000 times touch
Serial Interface Parameters
Mode TTL/CMOS
Voltage Level Test Condition Min Typ Max Unit
Output 1, Iout = 1mA 3.0 3.3 - V
Output 0, Iout = -1mA - 0 0.3 V
Input 1, Iin = 1mA 2.4 3.3 5.0 V
Input 0, Iin = -1mA 0 - 0.5 V
Baud Rate 3150~3225600bps, typical value of 115200bps
Data Format N81
Interface Cable FCC50_0.5 mm
Electrical specifications
Rated Power <5W
Operating Voltage 7~15V, typical value of 12V
Operating Current 200mA VCC=12V, max backlight
90mA VCC=12V, backlight off
Recommended power supply: 12V 1A DC
Operating environment
Operating Temperature -20℃~70℃ (12V @ 60% RH)
Storage Temperature -30℃~80℃
Conformal Coating Yes
Operating Humidity 10%~90%RH, typical value of 60% RH
Application

1

12 (1)


  • Previous:
  • Next:

  • Function working principle共用 开发流程描述8 PIN 2.0

    Related Products