4.3 Inch Intelligent Display DMG48270C043_04W(Commercial grade)

Specification

DWIN 480xRGBx272, UART LCM

Features:

● Based on self-designed T5L0, 262K Color, 18bit, 480*272, Cheap TV-TN-TFT-LCD;

● No touch /Resistive touch/Capacitive touch screen Optional;

● TTL/RS232 Interface,10Pin1.0mm FCC connection wire;

● Download via SD card or on-line serial port;

● Easy-to-use DWIN DGUS V7.6 GUIs Development, no coding skills required;

● Dual Development System: DGUS II/ TA(Instruction set);

Send email to us Datasheet 3D Data

Rated Power

Operating Voltage

4.5~5.5V, typical value of 5V

Operating Current

VCC=5V, max backlight

VCC=5V, backlight off

Recommended power supply: 5V 1A DC

Video

Hardware and interface description

LCM interface	FPC40_0.5mm, RGB interface
TP interface	Capacitive touch: COB structure, IIC interface
TP interface	Resistive touch: 4Pin_1.0mm interface
User interface	10Pin_1.0mm latching socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash	16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Buzzer	3V passive buzzer. Power: <1W
SD card interface	FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
PGT05 interface	When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal

Display Parameters

LCD Type	TV-TN, TFT LCD
Viewing Angle	TV viewing angle, 70°/70°/40°/30° (L/R/U/D)
Resolution	480×272 pixels (0°/90°/180°/270°)
Color	18-bit 6R6G6B
Active Area (A.A.)	95.04mm (W)×53.86mm (H)
Backlight Mode	LED
Backlight Service Life	>20000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
Brightness	DMG48270C043_04WTC: 250nit
	DMG48270C043_04WTR: 200nit
	DMG48270C043_04WN: 300nit
Brightness Control	0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.

Touch Parameters

Type	CTP (Capacitive touch panel)
Structure	G+G structure with surface cover of tempered glass
Touch Mode	Support point touch and drag
Surface Hardness	6H
Light Transmittance	Over 90%
Life	Over 1,000,000 times touch

Type	RTP (Resistive touch panel)
Structure	ITO film + ITO glass
Touch Mode	Support point touch and drag
Surface Hardness	3H
Light Transmittance	Over 80%
Life	Over 1,000,000 times touch

Serial Interface Parameters

Mode	UART2: ON=TTL/CMOS; OFF=RS232 UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration)
Voltage Level	Test Condition	Min	Typ	Max	Unit
	Output 1, Iout = -4mA	2.7	3.2	-	V
	Output 0, Iout = 4mA	-	0.1	0.4	V
	Input 1	2.4	3.3	5.5	V
	Input 0	0	-	1.0	V
Baud Rate	3150~3225600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable	10Pin_1.0mm

Electrical specifications

Operating environment