Specification
| T5L1 ASIC | Developed by DWIN. Mass production in 2019,1MBytes Nor Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times |
| Color | 18-bit 6R6G6B |
| LCD Type | IPS, TFT LCD |
| Viewing Angle | Wide viewing angle, 85°/85°/85°/85° (L/R/U/D) |
| Display Area（A.A） | 40.80mm (W)×30.60mm (H) |
| Resolution | 240×320 pixels (0°/90°/180°/270°) |
| Backlight | LED |
| Brightness | DMG32240C020_03WN: 300nit DMG32240C020_03WTR: 250nit DMG32240C020_03WTC: 250nit |
| Type | RTP (Resistive touch panel) |
| Structure | ITO film + ITO glass |
| Touch Mode | Support point touch and drag |
| Surface Hardness | 3H |
| Light Transmittance | Over 80% |
| Life | Over 1,000,000 times touch |
| Type | CTP (Capacitive touch panel) |
| Structure | G+G structure with surface cover of Asahi tempered glass |
| Touch Mode | Support point touch and drag |
| Surface Hardness | 6H |
| Light Transmittance | Over 90% |
| Life | Over 1,000,000 times touch |
| Power Voltage | 4.5~5.5V |
| Operation Current | VCC=5V, max backlight,130mA |
| VCC=5V, backlight off,50mA |
| Working Temperature | -20~70℃ |
| Storage Temperature | -30~80℃ |
| Working Humidity | 10%~90%RH, typical value of 60% RH |
| LCM interface | FPC40_0.5mm, RGB interface |
| RTP interface | FPC4_1.0mm |
| CTP interface | 6Pin_0.5mm, IIC interface |
| Baudrate | 3150~3225600bps |
| Output Voltage | Output 1, Iout = -4mA;3~3.3 V |
| Output 0, Iout = 4mA;0~0.3 V | |
| Input Voltage (RXD) | Input 1；2.4~5.0V |
| Input 0；0~0.5V | |
| User Interface | 10Pin_1.0mm latching socket for power supply and serial communication. Download rate(typical value): 12KByte/s UART2: TTL/CMOS; UART4: TTL/CMOS;(Only available after OS configuration) |
| Flash | 16MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times |
| Buzzer | 3V passive buzzer. Power: <1W |
| SD interface | FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s |
| PGT05 interface | When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal |
| DMG32240C020_03WN | Without touch panel, Buzzer |
| DMG32240C020_03WTR | Resistive touch panel, Buzzer |
| DMG32240C020_03WTC | Capacitive touch panel, Buzzer |
