Specification
Product Tags
ASIC
| T5L1 ASIC |
Developed by DWIN. Mass production in 2019,1MBytes Nor Flash on the
chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times |
Hardware and interface description
| LCM interface |
FPC60_0.5mm, RGB interface |
| TP interface |
CTP: COB structure, IIC interface |
| RTP: FPC4_1.0mm |
| User interface |
8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s |
| Flash |
16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times |
| Expand Flash |
Expandable to 64Mbytes NOR Flash or 48Mbytes NOR Flash+512Mbytes NAND Flash |
| Buzzer |
3V passive buzzer. Power: <1W |
| RTC |
Super-capacitor for power supply. Accuracy: ±20ppm@25℃. It can work normally for 7 days after power failure |
| SD card interface |
FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s |
| PGT05 interface |
When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal |
Display Parameters
| LCD Type |
TN,TFT LCD |
| Viewing Angle |
Normal viewing angle, 70°/70°/50°/70° (L/R/U/D) |
| Resolution |
800×600 pixels (0°/90°/180°/270°) |
| Color |
24-bit 8R8G8B |
| Active Area (A.A.) |
211.2mm (W)×158.4mm (H) |
| Backlight Mode |
LED |
| Backlight Service Life |
>10000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness) |
| Brightness |
DMG80600Y104_04NC: 200nit |
| DMG80600Y104_04NR: 150nit |
| Brightness Control |
0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) |
| Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. |
Touch Parameters
| Type |
CTP (Capacitive touch panel) |
| Structure |
G+G structure with surface cover of tempered glass |
| Touch Mode |
Support point touch and drag |
| Surface Hardness |
6H |
| Light Transmittance |
Over 90% |
| Life |
Over 1,000,000 times touch |
| |
| Type |
RTP (Resistive touch panel) |
| Structure |
ITO film + ITO glass |
| Touch Mode |
Support point touch and drag |
| Surface Hardness |
3H |
| Light Transmittance |
Over 80% |
| Life |
Over 1,000,000 times touch |
Serial Interface Parameters
| Mode |
UART2: ON=TTL/CMOS; OFF=RS232
UART4: ON=TTL/CMOS; OFF=RS232(Not available in TA instruction set mode. Only available after OS configuration in DGUS) |
| Voltage Level |
Test Condition |
Min |
Typ |
Max |
Unit |
| Output 1, Iout = -4mA |
4.78 |
5.0 |
- |
V |
| Output 0, Iout = 4mA |
- |
- |
0.4 |
V |
| Input 1 |
2.5 |
5.0 |
- |
V |
| Input 0 |
- |
- |
1.0 |
V |
| Baud Rate |
3150~3225600bps, typical value of 115200bps |
| Data Format |
UART2: N81
UART4: N81/E81/O81/N82 , 4 modes (OS configuration) |
| Interface Cable |
8Pin_2.0mm |
Electrical specifications
| Rated Power |
<5W |
| Operating Voltage |
7~36V, typical value of 12V |
| Operating Current |
440mA |
VCC=12V, max backlight |
| 125mA |
VCC=12V, backlight off |
| Recommended power supply: 12V 1A DC |
Operating environment
| Operating Temperature |
-10℃~60℃ (12V @ 60% RH) |
| Storage Temperature |
-20℃~70℃ |
| Conformal Coating |
None |
| Operating Humidity |
10%~90%RH, typical value of 60% RH |
Peripheral
| DMG80600Y104_04NC |
Capacitive touch panel, SD card interface, Buzzer |
| DMG80600Y104_04NR |
Resistive touch panel, SD card interface, Buzzer |
Previous: 7.0 inch 800*480 900nit Hightlight 65K colors LVDS multimedia display DVI-I interface:HDW070_NR
Next: 7.0 inch 800*480 65K 900nit Highlight colors Resistive touch LVDS multimedia display DVI-I Interface :HDW070_002L
