7.0 Inch CAN LCD Touch Display DMG10600T070_A5W(Industrial Grade)

Specification

DWIN 1024*RGB*600,UART LCM

Features:

● Based on T5L2, running DGUS II system, industrial grade.

● 7.0-inch, 1024*600 pixels resolution, 16.7M Colors, IPS-TFT-LCD, wide viewing angle.

● RS232/RS485 Interface,8Pin_3.81mm Socket*1，(WTC has CAN bus interface *1;)

● Touch Option: Resistive/Capacitive;

● 16/32MBytes NOR Flash, expandable to 64Mbytes NOR Flash;

● Onboard speaker. Power: 2W;

● Protective Level:IP65(front);

Send email to us Datasheet 3D Data

Rated Power

Operating Voltage

7~36V, typical value of 12V

Operating Current

VCC=12V, max backlight

VCC=12V, backlight off

Recommended power supply: 12V 1A DC

Video

Hardware and interface description

LCM interface	FPC50_0.5mm, RGB interface
CTP interface	Capacitive touch panel: COB structure, IIC interface
User interface	8Pin_3.81mm socket and 4Pin_3.81mm socket for power supply andserial communication. Download rate(typical value): 12KByte/s
Flash	32MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Expand Flash	Expandable to 64Mbytes NOR Flash or 48Mbytes NOR Flash+512Mbytes NAND Flash
Speaker	Onboard speaker. Power: 2W
RTC	Button cell for power supply. Accuracy: ±20ppm @25℃
SD card interface	FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
Reserved module interface	Wi-Fi module: connect to the cloud platform to update remotely
PGT05 interface	When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal

Display Parameters

LCD Type	IPS, TFT LCD
Viewing Angle	Wide viewing angle, 85°/85°/85°/85°(L/R/U/D)
Resolution	1024×600 pixels (support 0°/90°/180°/270°)
Color	24-bit 8R8G8B
Active Area (A.A.)	154.20mm (W) ×85.88mm (H)
Backlight Mode	LED
Backlight Service Life	>30000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)
Brightness	DMG10600T070_A5WTC: 250nit
Brightness Control	0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.

Touch Parameters

Type	CTP (Capacitive touch panel)
Structure	G+G structure with surface cover of tempered glass
Touch Mode	Support point touch and drag
Surface Hardness	6H
Light Transmittance	Over 85%
Life	Over 1,000,000 times and depending on the working environment

Serial Interface Parameters

Mode	UART2: RS232 UART4: RS485 (Only available after OS configuration) UART5: RS232 (Only available after OS configuration) CAN*1
UART2,5 Voltage Level	Test Condition	Min	Typ	Max	Unit
	Output 1	-	-5.0	-3.0	V
	Output 0	3.0	5.0	-	V
	Input 1	-15.0	-5.0	-	V
	Input 0	-	5.0	15.0	V
UART2,5 Baud Rate	3150~3225600bps, typical value of 115200bps
UART4 Voltage Level	Test Condition	Min	Typ	Max	Unit
	Output 1	2.5	5.0	-	V
	Output 0	-	-5.0	-2.5	V
	Input 1	0	2.5	-	V
	Input 0	-	-2.5	-0.2	V
UART4 Baud Rate	3150~921600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (O Sconfiguration) UART5: N81/E81/O81/N82 ,4 modes (O Sconfiguration)
Interface Cable	8Pin_3.81mm Socket；4Pin_3.81mm Socket (CAN*1)

Electrical specifications

Operating environment